- Version 1.2
- Download 163
- File Size 295KB
- File Count 1
- Create Date December 21, 2016
- Last Updated December 22, 2016
I2C Scripting Tool
I2C Scripting Tool allows you easy testing of I2C Slave via GUI.
Download I2C Scripting Tool
Click to rate this post!
[Total: 0 Average: 0]
Does this only support the SiLabs chip or will it work with the FTDI cable as well?
Ok, I got it. The 8bit address is required. So the 7bit adress neds to be multiplied by two
Example: DS3132 address 0x68*2=0xD0
Regards
Hi, thanks for developing this nice tool.
It works as intended. However the addresses of the i2c devices seams somewhat scrambled.
A ds3231 with 0x68 will be found by your toll as 0xd0
A flash chip with 0x57 will be found by your toll as 0xae
I can read aout the chip just fine with the “wrong” address.
Any idea what’s going on?
regards
J
Hello!
Can this tool also read EEPROM chips using i2c? CP2112 seems to supports eeprom programming. Would be nice to have programmer feature.